ElectriFly Edge 540 3D Indoor EP ARF GPMA1128
This is the electric powered, radio controlled, almost ready to fly
ElectriFly Edge 540 3D Indoor Aerobatic Airplane.
Park Pilot Program Legal Aircraft
Features
Construction: 0.12" (3mm) thick extruded polystyrene Pro-Formance
foam with carbon fiber rods for support, all flight surfaces are
beveled for maximum deflection and pre-hinged with 3M Blenderm tape
for strength
Landing Gear: Two-piece straight rods with flat foam wheel pants
Wheels: Two foam 1" (26.4mm) diameter
Hardware: Full set included
Building Time: Approximately 2-4 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
date of purchase. This warranty does not cover any component parts
damaged by use or modification
Includes
ElectriFly ARF Edge 540 3D Aerobatic Airplane, landing gear, wheels,
hardware and photo-illustrated instruction manual
Requires
Radio: 4-channel
Servos: 3-micro high torque
Indoor Operation;
Motor: Rimfire 250 Brushless Outrunner, GPMG4502
Battery: 2S LiPo at least 300mAh, GPMP0700
Outdoor Operation:
Motor: Rimfire 300 Brushless Outrunner, GPMG4505
Battery: 3S LiPo 11.1V at least 300mAh GPMP0701
ESC: Indoor: 8A for Brushless Motors: GPMM1800
Outdoor: 10A
Cell Balancer: For LiPo battery, GPMM3160
Battery Charger: LiPo compatible
Propeller: 8x4E for 3D/Sport setup
Building and field equipment
Specifications
Wingspan: 32" (815mm)
Wing Area: 274 sq in (17.7 sq dm)
Weight: 6 - 6.3oz (170 - 180g)
Wing Loading: 3.2 - 3.3oz/sq ft (9.8 - 10g/sq dm)
Length: 35" (890mm)
Center of Gravity: 5/8" (15mm) back from the carbon strip in the
wing on both sides of the fuselage +/- 1/4" (6mm)
Control Throws-
Low Rate High Rate 3D
Elevator: 1" (25mm) 17° 1-3/4" (44mm) 30° 2-3/4" (70mm) 53°
Rudder: 2" (51mm) 25° 2-3/4" (70mm) 35° 3-3/4" (95mm) 52°
Ailerons: 1" (25mm) 14° 1-5/8" (41mm) 23° 4" (102mm) 79°
Features
• Construction: 0.12" (3mm) thick extruded polystyrene Pro-Formance foam with carbon fiber rods for support all flight surfaces are beveled for maximum deflection and pre-hinged with 3M Blenderm tape for strength
• Landing Gear: Two-piece straight rods with flat foam wheel pants
• Wheels: Two foam 1" (26.4mm) diameter
• Hardware: Full set included
• Building Time: Approximately 2-4 hours
