Radiolink AT10II 2.4G 10CH Transmitter With R10DS Receiver Orange
The RadioLink AT10 2.4GHz 10CH control system is extremely versatile and can be used by beginners and pros alike.
Weighing less that 1KG, the AT10 is extremely light, given it's capabilities! Compatible with most types of RC aircraft including airplanes, gliders, helicopers and multicopters the A10 packs a huge amount of features normally found or more expensive units....
The RadioLink AT10 2.4GHz 10CH control system is extremely versatile and can be used by beginners and pros alike. Weighing less that 1KG, the AT10 is extremely light, given it's capabilities!
Compatible with most types of RC aircraft including airplanes, gliders, helicopers and multicopters the A10 packs a huge amount of features normally found or more expensive units.
Its large array of features can be configured and controlled via its 480x320 16 colour 78 x 52mm 16 TFT screen. The A10 takes advantage of modern 2.4GHz direct sequence spread spectrum technology (DSSS) to provide a robust data link to your aircraft at up to 1000 meters.
The connection is also two way and with the included 10 channel receiver and power return module allowing your model to post back information to the A10 including battery voltage, RSSI and so on.
The A10 also has a high 2048 resolution for all channels with a 3ms response time from stick to receiver output.
In order for you to make the most of the system and to fly safely, please be sure to read the manual, which is available on our support forum, a link to which is at the bottom of the page.
Please note that the A10 requires 8x AA batteries which are not supplied.
The AT10 is available in both orange and Grey. Make your selection above.
Feature:
10 channels
2.4GHz ISM band frequency
3.5 inch 16color LCD
Perfect for any aircraft
Includes hardware to add auto-centering for the left (throttle) joystick
The Radiolink AT10 2.4G 10CH Transmitter w/ R10D Orange Receiver
is an affordable radio system made for aircraft with a range of 2km. It also includes a 3.5" LCD
screen to keep you informed on your aicraft status.
FAST
Fast response, 3ms only, which is much less than the average 20ms even 10 channels it
acts synchronously
COMPLETED
Including helicopter 8 swash plate models, fixed wing 2 airfoils 3 rears, gliders 4 airfoils and 2 rears.
STABLE
DSSS spread spectrum mode supplies better performance in anti-interference
DATA TELEMETRY
Exclusive technology: support signal strength, receiver voltage monitored and extending battery
voltage, temperature, motor RPM, GPS etc
HIGH SECTION PRECISION 4096 RUDDER SHAKE FREE
4096 section precision, 0.25us per section, servo anti-shake rudder
COLOR LCD
3.5 inch 16color LCD, resolution 320x480 distinct and magnificent
ENERGY SAVING MAKES FANTASTICALLY EFFICIENT
Current consumption 130mA, 40% of similar products in the market
Specification Of R10DS Receiver:
Dimension: 18.0x9.5x22cm
Weight: 0.95kgs
Frequency: 2.4GHz ISM band (2400MHz to 2485MHz)
Modulation mode: QPSK
Channel bandwidth: 5.0MHz
Spectrum: DSSS
Adjacent channel rejection: > 38dBM
Transmitter power: < 100mW(PCB testing), < 20dBm(3 meter air testing)
Operating Current: < 105mA
Operating Voltage: 8.6-15V
Control distance: 2km
Channel: 10 Channel, channel 8-10 are customizable
Screen: 16 colors screen,size 78x52mm.320*480 pixel
Switches included: two 3-section, five 2-section, one reset switch and five proportional potentio-meter
Specification of the AT10II Transmitter:
Frequency: 2.4GHz
Channel: 10CH,support SBUS and PWM signal output
Working Voltage:4.8-10V
Working Current:38-45mA
Dimension:50x31.5x14.5mm
Weight:14g
Include:
RadioLink AT10II 2.4G 10CH Transmitter Orange w/ R12DS For RC Quadcopter Multicopter