Top Flite Cessna 182 Skylane .60-.91 GP/EP ARF 81" TOPA0906
(ONLY one available at this stage in South Africa)
FEATURES
Construction: Balsa and ply
Wings: One-piece with plywood wing joiner
Aileron Control: Dual servo
Covering: Top Flite MonoKote
Cowl: Painted fiberglass
Cockpit Detail: Seats and instrument panel
Lights: Two landing lights in cowl, one navigational light on each
wing and red MARS beacon light on top of fin (requires separate
receiver battery)
Spinner: Polished aluminum, 2.25" (57mm) diameter
Landing Gear: Main, two piece fiberglass, Nosegear 0.20" (5mm)
diameter prebent wire
Wheel Pants: Constructed of fiberglass, white in color
Wheels: Three foam, two main 3.25" (82mm) diameter, one nosewheel
Engine Mount: Two-piece composite
Fuel Tank: 14oz (420cc)
Building Time: Ready to fly in 15-20 hours
Warranty: Top Flite® Models guarantees this kit to be free from
defects in both material and workmanship at the date of purchase.
This warranty does not cover any component parts damaged by use or
modification. In no case shall Top Flite's liability exceed the
original cost of the purchased kit.
INCLUDES
Top Flite Cessna Skylane Gold Edition Airplane with decals, all
hardware, clear plastic windshield and side glass, fiberglass tail
cone, engine mount, cowl, three wheels, instruction manual and
wheel pants
REQUIREMENTS
Engine: .60-.91 cu in (10-15cc) two-stroke OR
.91-1.20 cu in (15-20cc) four-stroke OR
Motor: Rimfire 120 (50-65-450) Outrunner
LiPo Batteries: Two connected in series if using electric motor
Radio: 6-channel
Servos: Six standard with at least 44oz/in (3.2kg/cm) torque
24" (610mm) Servo Extensions: Two for ailerons
12" (305mm) Servo Extensions: Six for ailerons, flaps and wing tip
lights
Y Harnesses: Two for aileron and flap surfaces
Receiver Packs: 1000mAh minimum and 600mAh pack for flying lights
Specifications:
Wingspan: 81 in (2060mm)
Wing Area: 898 sq in (57.9 dm2)
Weight: 11.5 - 12.5lb (5220 - 5670g)
Wing Loading: 30 - 32 oz/sq ft (92 - 98 g/sq dm)
Length: 64 in (1630mm)
Airfoil: Semi-symmetrical
CG (Center of Gravity): 4-5/16" (110mm) back from the leading edge of
the wing
Control Throws- Low Rate High Rate
Elevator: 3/4" (19mm) 10° 1-1/16" (27mm) 15°
Rudder: 5/8" (16mm) 9° 1" (25mm) 15°
Ailerons: 1/2" (13mm) 14° 5/8" (16mm) 17°
Flaps: 1/2 - 1" (25mm) 18° down
full - 2" (51mm) 36° down
