Eagle Tree Racing Eagle Eyes FPV Station

Eagle Eyes FPV Station ETR00144
 

Features:
Receiver Diversity: when you connect two NTSC or PAL audio/video receivers (of any frequency), the EagleEyesTM picks the better signal at any given time, which can greatly reduce video fades and improve your FPV experience! A variety of diversity settings are configurable with the on-board switches and LED indicators.

Antenna Tracking: Is your video transmitter suffering from low range? When coupled with the Vector or OSD Pro on screen display's, the EagleEyes is the heart of a full-featured pan/tilt antenna tracker. Powerful, easy to use PC software and on-screen menus are provided for adjusting the EagleEyes to work flawlessly with the tracker of your choice. An exclusive to Eagle Tree, multiple pan points can be calibrated, resulting in greater panning accuracy even if your pan servos are somewhat nonlinear. The built-in regulator drives even large pan/tilt servos, with no need for an external BEC.

Telemetry: When coupled with the Vector or OSD Pro on screen display's, all Eagle Tree data (not just GPS position) are transmitted to your laptop, via your video transmitter and the EagleEyes USB port (separate USB cable required). Your model's flight can then be graphed and displayed with Eagle Tree's powerful software, or visualized (either in real time or after your flight) with Google Earth! With the EagleEyes, telemetry is embedded invisibly in the video, rather than in the audio channel. Eagle Tree chose video telemetry because it is much more reliable and faster than audio telemetry, and audio telemetry takes up your audio channel, so you can't hear motor sounds, Vector or OSD Pro voice prompts, etc.

Four Channel A/V Distribution: Ever wish you had more video/audio outputs? The EagleEyes has four built-in outputs!

Programmable Low Voltage Alarm: How is your ground station battery doing? Now you can program a low voltage alarm buzzer, which alerts you when your battery is below your chosen voltage. The buzzer can also be programmed to alert for other conditions, such as poor telemetry signal.

PowerPanel LCD Display: Now you can plug our PowerPanel LCD directly into the EagleEyes, and snap it inside the EagleEyes case, for real-time GPS position display, with additional display features coming soon. With the LCD, the last known GPS position is remembered and displayed, in case you lose contact with your model.

Two video inputs: NTSC/PAL, using your video receivers of any frequency. Video Input 2 is adjustable to match Video Input 1. Note that only one input needs to be used, if you are not using the Diversity feature.

Two audio inputs: Two monaural audio inputs are supported. Audio Input 2 is adjustable to match Audio Input 1. Note that only one input needs to be used, if you are not using the Diversity feature.

Four A/V outputs: Four video outputs (75 ohm) and four "line level" audio outputs

Power Input: Power input range approximately 6V to 14V. Barrel style power input with standard 2mm center pin.

Two Servo Outputs: Unit is capable of delivering 5A burst output to drive even large pan/tilt servos for pan and tilt trackers.

USB Port for connecting to PC: For live PC display of telemetry and firmware update. Note: A standard USB "Mini-B" cable is required for these features, but not included.

Case Included: The EagleEyes includes a clear plastic case. The case can be used with or without the top portion. The bottom portion includes "screw bosses" for rigidly mounting the EagleEyes to your ground station or tracker, and the top portion includes an internal snap mount for the PowerPanel LCD.

 Specifications:
Height: Approx. 2.5 in 
Width: Approx. 3 in 
Length: Approx. 5 in 
Mass: Approx. 78 grams 
Weight: Approx. 7.5 oz