JR Propo GS-R260Z Sport Helicopter

   GS-R260Z Sport Helicopter 88255
 
  
Specifications:Overall length : 1,623mm
    Overall width : 210mm
    Overall height : 472mm
    Gross weight : 7,150g or more (with Main rotor blade)
    Main rotor diameter : 1,785mm (JRC810)
    Tail rotor diameter : 288mm
    Gear Ratio : 6.77:1:5.18
    Swash type : 120 CCPM/MPM (Option)

    Engine Starting System:Recoil starter /Shaft Starter Engine
    Tail Drive System:Belt Drive
    Frame:Duralumin made frame (Upper frame 2mm/Lower frame 3mm thickness
    Engine (included):Zenoah 26cc Gasoline engine G260PUH1 (JR Type)
    Muffler:Option muffler JRM260S
    Main Rotor Blades (included):JRC810 (carbon rotor)

Items included
    26cc Gasoline engine G260PUH-1
    Optional muffler JRM260S
    Carbon main rotor blades XB810

Additional items required
    5-Channel or greater helicopter RC system with CCPM and 5 servos (DSX12/DSX11/DSX9 etc.)
    * When MPM system is used,It's not required to have CCPM-compliant radio.
    * If you wish to use MPM system,please purchase following item.
    MPM conversion set [No.61211]
    Servo Horn
    * Servo horns are not necessary if supplied with your radio set.
    * Big Horn 3pcs and Super Horn 1pc are included.
        Radius of 27mm (for CCPM) 3pcs
        Radius of 10.5mm (for MPM) 3pcs<
        Radius of 14-17mm (for Rudder) 1pc
        Radius of 12.5mm (for Throttle) 1pc
    * Check your gyro for required quantity
    * Zenoah 2cycle Mix oil 1000cc [No.55100]recommended .
    Starting rod [No.60227],Starter and Power supply are needed when shaft starter is used.
    If you use Fuel pump,please use the one with gasoline resistant.

Tools Required For Assembly
    Phillips Screwdriver (Large/Small)
    Nut Driver (Opposite Side:4-12mm)
    Needle-nose pliers
    Drills (3mm･4mm･6mm)
    Scissors
    Hobby knife
    Scale (25cm or Longer)
    Quick Drying Glue
    Epoxy Resin (more than 30 minutes to become hardened)
    JR Thrust bearing Grease [No.61005]
    JR Universal Precision Pitch Gauge [No.60326]
    Diluted Soap Water and Spray (Upon apply decal)
    Other general tools for assembling the model

Useful Tools
    JR Universal Ball Link Driver [No.61360]
    JR Universal Ball Link Trimmer [No.60219]
    JR Universal Ball Link Pliers C (Straight Tip) [No.60242]
    Nut Drivers (4.5mm･5mm･5.5mm)
    Hex Drivers (1.5mm･2mm･2.5mm･3mm･4mm)
    Reamer
    Rotor blade balancer