Futaba 12K 2.4GHZ W/R 3008SB T-FHSS

12K 2.4GHZ W/R 3008SB T-FHSS
Description

 

The 12K combines first-class performance with incredible versatility to create a system that's easy to operate, yet feature-packed! Available in systems perfectly matched for airplanes, helis and gliders, the 12K is also compatible with multi-rotors, so pilots get the best of all worlds.

 

Equipped with the rock-solid Futaba S-FHSS and T-FHSS protocols, the 12K is compatible with almost a dozen different Futaba receivers to suit modelers' needs. The 12K can transmit and receive telemetry data via the T-FHSS protocol.
Simply install Futaba telemetry sensors (sold separately) to monitor flight data, receive alerts while in flight and more.
These sensors allow pilots to keep track of battery voltage, altitude, speed and other key flight functions.

 

In addition to telemetry, the 12K can be used with S.Bus2 gear to add multiple servos, gyros and more to set-ups with fewer cables.
Pilots with non-telemetry set-ups can take advantage of the interference-free S-FHSS protocol.
A large, backlit LCD screen, expandable 30-model memory, a 6V 1800mAh NiMH battery and charger are just a few more of the features the 12K has to offer.

 

Choose from airplane and heli 12K systems with the R3008SB telemetry receiver included. FPV/drone pilots will appreciate the lightweight, compact R3001SB FPV drone receiver optimized for their applications. 

 

Transmitter Features:

Channels: 14 (12 proportional, 2 switched)

Compatible with T-FHSS and S-FHSS protocols

Six 3-position switches, two 2-position switches, two slider levers, two rotary dials, four digital trims and two push buttons for quick, easy access

Headphone plug, trainer port and S.Bus plug-in

S.Bus2 system allows multiple servos, gyros and telemetry sensors with a minimum number of cables

Model types: six types of main wing with three tail types for airplanes, six swash types for helis and multi-rotor functions

Improved stick feel with adjustable lengths and tension

Dual rates/exponential

Included 6V 1800mAh NiMH battery and charger

Large, backlit LCD screen with adjustable contrast for easier reading. Push/dial operation simplifies set-up

Micro memory card slot for storing model information and free system updates. (SD-32MB to 2GB; SDHC-4GB to 32GB, not included)

Vibration feature alerts pilots to various alarms and timers, in addition to sound

10-character model naming

Expandable 30-model memory

5 flight conditions (Helicopter and Glider model selections)

5 customizable programmable mixes

Servo test and servo position display

Fuel mixing

Stick calibration

Servo speed

Logic switching
 

Airplane Features:

6 wing types

3 tail wing types

5 flight modes

Pitch curve

Throttle curve

Throttle delay

Aileron differential

Flap setting

Aileron to camber flaps

Aileron to brake flaps

Aileron to rudder

Rudder to aileron

Camber mix

Elevator to camber

Camber flap to elevator

Butterfly function

Trim mix

Air brake

Gyro mix

V-Tail

Ailevator (dual elevator)

Winglet

Motor speed

Rudder to elevator

Snap roll

Multi-engine functionality

Airbrake
 

Helicopter Features:

Six swash types

Pitch curve and pitch trim

Throttle curve and throttle hover trim

Throttle hold

Swash ring

Pitch to needle

Pitch to rudder (revolution mixing)

Gyro mixing

Governor mixing

Timer settings

Throttle percent timer

Glider Features:

Glider-specific functions

6 wing types

3 tail wing types

Multirotor Features:

Throttle stick position warning

Gyro Sense

Flight Mode

Throttle Curve

Throttle Delay
 

R3008SB Receiver Features:

T-FHSS protocol

Dual Antenna Diversity

S.Bus/S.Bus2 ports (S.Bus2 port for bidirectional telemetry sensors)

8-channel PWM conventional ports

High voltage

Battery fail-safe

External voltage port: 0-70V DC

Power requirement: 4.8-7.4V
 

Dimensions: 0.98 x 1.86 x 0.56 in (24.9 x 47.3 x 14.3 mm)

Weight: 0.36 oz (10.1 g)

R3001SB Receiver Features

T-FHSS protocol

Dual Antenna Diversity

S.Bus/PWM and S.Bus 2 ports (S.Bus 2 port for bidirectional telemetry sensors)

High voltage

Battery fail-safe

Power Requirement: 4.8-7.4V

Dimensions: 0.83 x 1.65 x 0.21 in (21.1 x 41.8 x 5.3 mm)

Weight: 0.15oz (4.2 g)
dktcmc