Cymodel DRASTIK 40

This is an ARF and not a kit. Comes with complete hardware kit that includes- 2 1/5" foam wheels' fuel tank alum. landing gear that attaches with 3 screws, spinner, pushrods, tail wheel, etc.

Details are as follows:

Fuselage- Lite ply construction with lighting holes to save weight, Servo tray is installed and is located under the wing (1 servo for throttle, 1 servo for rudder and 1 servo for elevator). Firewall measures 3 1/2" wide and 3 5/8" tall. Landing gear attaches 5 1/8" back from firewall and uses 3 screws. Fuselage has a hatch located between wing and firewall with a spring loaded latch that lets you service the fuel tank (or batterys if you are using electric power)

Wing- 2 inches thick, 13 5/8" cord, symmetrical design, built up balsa design. has hardwood joiner and the 2 halves epoxy together. Uses 2 aileron servos for the ailerons (1 under each wing half). Ailerons are 17 1/2" by 3 1/4".

Tail Feathers - 7 1/2" cord including elevator halves. Horizontal stab. is 17 1/2" on leading edge tapering to 22" at rear (with elevator halves installed). Elevator halves are 8 1/2" by 3 1/4" each and join together with the pre-bent wire included. (be careful here and make sure it is a strong bond)). Vertical stab. is 71/4" tall and 8 1/2" long tapering to 2 inches at the top (rudder not included). Rudder is 8 1/2" tall. Rudder is 4 inches at the bottom tapering to 2 inches at the top.

FEATURES:
Good quality Trainer
large wing area design for more lift
Top quality balsa & ply construction
Premium hand iron-on covering film
Comes with all parts, hardware and accessories

Specifications:
Wingspan: 1485 mm
Wingarea: 49 dm2
Length: 1290 mm
Engine: 2stroke  0.40-0.52 cu.in
Radio: 4 Channles , 5 Servos
as rv